Bubblegum-96 (uCRobotics) Development Board powered by SoC Actions S900 available for $89

The Bubblegum-96 board was first shown in mid 2015 at trade shows in Asia. Since then, Actions has been working with Linaro to finalize the software support and ensure the best possible performance. Bubblegum-96 (uCRobotics) is powered by the Actions S900 quad-core ARM Cortex-A53 64-bit SoC up to 1.8GHz and with imagination 600MHz PowerVR G6230 GPU. It also has 2GB LPDDR3 DRAM (800MHz) and 8GB eMMC flash storage on board. Bubblegum-96 is also a board that satisfies the Linaro LCG 96boards design specification. About 96boards, we can see more from www.96boards.org. Development board will be available soon for $89.

Khadas VIM4 SBC with Amlogic A311D2 and HDMI input

Khadas VIM4 SBC w/ Amlogic A311D2 and HDMI Input Soon (May 10th)

April 25, 2022

Firefly ROC-RK3588S-PC 8K single board computer with RK3588S chipset

Firefly ROC-RK3588S-PC is an 8K Single-board PC with RK3588S Chipset

April 20, 2022

uCRobotics Bubblegum-96 specifications:

CPU – Actions S900 quad-core ARM Cortex-A53 64-bit SoC up to 1.8GHz
GPU – 600MHz PowerVR G6230
USB – USB 3.0 (Type A), x1USB 2.0 (Type A) x1, Micro USB 2.0 x 1
PMU – ATC2609 (kit with S900)
RF – 802.11b/g/n WiFi, Bluetooth 4.0
OS Support – Android 5.1 Lollipop & Debian Linux & Remix OS 2.0
Screen Resolution – 1920 x1080 Pixels, RGB/ LVDS/ MIPI DSI/ eDP
Internal Storage – 8GB eMMC Flash Storage
External Storage – microSD v3.0 socket
Video Capture – HD [email protected] H.264
TV Out – HDMI 1.4 with HDCP (HDMI connector type A/C), up to 4K Ultra HD MHL 2.1(USB connector) , up to 4K Ultra HD
External Buttons – On/Off (Sleep/wake)/ Reset
Extend Header(x40 pin) – +1.8V, +5V, SYS_DCIN, GND, UART, I2C, SPI, PCM, GPIO x12
Extend Header(x60 pin) – SDIO, MIPI_DSI, MIPI_CSI, I2C , USB2.0
Power – [email protected], Plug specification is inner diameter 1.7mm and outer diameter 4.8mm
Certification – Google GMS, CE, FCC, EMC etc
PCB Size – 85mm x 54mm (L x W)

Bubblegum-96 Features:

Optimized Actions S900 quad-core ARM Cortex-A53 64-bit SoC up to 1.8GHz
Embedded PowerVR™ G6230 GPU for stunning, high-quality graphics and superior gaming experiences
28nm LP process based on Actions Gen-4 Low Power Design Technology
Integrated HDMI with Ultra 4K output
Built-in security systems TrustZone®Security
High performance, low latency and low cost
Support Android 5.1 Lollipop & Debian Linux & Remix OS 2.0
Companion PMU with built-in Audio Codec – ATC2609

On armdevices you can find a video from MWC 2016 in which it was presented Bubblegum-96 development board.

[embedyt] http://www.youtube.com/watch?v=hpfsx8YTfSk[/embedyt]

Source: ucrobotics and armdevices